SOCET SET Patch for v541 Domestic, Build 20080409 (v541.20080409) DISCLAIMER: +-----------------------------------------------+ BAE Systems is making this engineering patch available to you as a convenience, and is intended for use by properly licensed customers of BAE Systems only. The patch is not supported as part of the official SOCET SET baseline. The patch application may overwrite some existing files of the base installation and/or make structural changes to the repository. For best results, it is recommended that you make a note of the base installed files to overwrite, and backup the base installed directory prior to applying the patch. If the engineering patch is a library, .dll or .so file, then the patch will be used by all SOCET SET applications, and every application is potentially affected. Save a copy of the original file that the engineering patch is replacing, and be prepared to restore the original file if the engineering patch adversely impacts your operations. The patch contained herein is provided "As Is." BAE Systems makes no warranties of any kind whatsoever with respect to the patch. In no event shall BAE Systems be liable for any special, direct, indirect, or consequential damages resulting from loss of use, data or profits arising out of, or in connection with the use or performance of this patch. EXPORT CONTROLLED: This software is subject to the export control laws and associated regulations of the United States. It may not be transferred to a non-U.S. person without the proper prior authorization of the U.S. Government +-----------------------------------------------------------+ Below are the DR numbers and descriptions of the fixes included in this patch. Every patch is cumulative, and includes the fixes from every prior patch. It is recommended that you make a backup of your current installation directory before installing this patch. The patch install will overwrite files in the target directory without creating backups. If you need to backout this patch, you will have to re-install the software from the original installation CD. No changes to your system will be made outside of the installation directory. Fixes from Patch v541.20080409; +----------------------------------------------------------------+ GXP00008511 Fixes problem where Update GeoTiff Header creates files that MC GIL can t ingest Fixes from Patch v541.20080404 +----------------------------------------------------------------+ GXP00008074 ITE undo corrupting TIN with Bare_earth_ _lay_on_ground tools GXP00008235 ITE Query Post tool does not work in v541 GXP00008443 Fixes a possible DTM graphics gap that only appears when a DTM is first drawn Fixes from Patch v541.20080402 +----------------------------------------------------------------+ GXP00008155 FPE Provide an Edit TRA Window GXP00008244 TIN breakline duplicates its vertices as masspoint Merge does not merge point features Fixes from Patch v541.20080326 +----------------------------------------------------------------+ GXP00000000 updates for new patch build environment only GXP00006550 force patch install to deliver a new ssver executable GXP00007010 This patch allows the user to import Radarsat 2 data as RPC Fixes from Patch v541.20080325 +----------------------------------------------------------------+ GXP00000000 updates for new patch build environment only Fixes from Patch v541.20080320 +----------------------------------------------------------------+ GXP00006953 FPE Don t Allow Certain Tie Points Between Adjacent Images Fixes from Patch v541.20080319 +----------------------------------------------------------------+ GXP00006414 Handle updates to GeoTIFF files larger than 2 G Byte GXP00006957 GXP00007263 Fixes to apply auto brightness contrast to all images and auto recenter all viewports when running IPM GXP00007010 This patch allows the user to import Radarsat 2 data as RPC GXP00007260 Fixes crash in Import Bulk Patches when sorting columns in patch table Fixes from Patch v541.20080317 +----------------------------------------------------------------+ GXP00006548 Change Format of Relative Accuracy in DPPDB Hardcopy Manifest Fixes from Patch v541.20080312 +----------------------------------------------------------------+ GXP00000000 updates for new patch build environment only GXP00005335 Fixed Qt related code to conform to Qt s restrictions GXP00006573 Changes DTED Import to use the same path each time for file selection GXP00006828 Change CIB ISVB Check to Only Degrade Classified Sensors GXP00006831 Fixes a possible overflow issue when creating a new DTM GXP00006842 Mixed Source Requires Multiple Submits for Order Image Segments GXP00007080 Fixes Map Assessment when using one map image and control points GXP00007084 Provide Capability for North South DPPDB Segment Cuts GXP00007258 Review Edit Models Selection Jumps to End of List GXP00007297 Move Adjacent Rectangle Selection to Main Import Support Data Window GXP00007337 Fixes a issue with absolute and relative error in the DTM header when chipping a single DTM in Merge Fixes from Patch v541.20080303 +----------------------------------------------------------------+ GXP00000000 updates for new patch build environment only Fixes from Patch v541.20080229 +----------------------------------------------------------------+ GXP00000000 updates for new patch build environment only GXP00005305 Make AIO working better for fine scan resolution e g 10 microns pixel GXP00006535 Read Write VerticaCSGeoKey into terrain geotiff header Fixes from Patch v541.20080219 +----------------------------------------------------------------+ GXP00000000 updates for new patch build environment only GXP00006422 This fix allows Partial Frame Fill to be run on a CIB job GXP00006535 Read Write VerticaCSGeoKey into terrain geotiff header GXP00006923 SFA Next and Previous Feature does not always work GXP00006925 SFA auto attribution may fail for NGA height attributes under certain conditions Fixes from Patch v541.20080213 +----------------------------------------------------------------+ GXP00006286 Fix the return value of cib_cmp_frm_exec GXP00006907 Allow proper parsing of filenames for multi segmented nitf s on Solaris Fixes from Patch v541.20080208 +----------------------------------------------------------------+ GXP00006580 Fix for Import Bulk Patches overwriting assessment_order_status file GXP00006645 Allows use of the u key in ITE s Write DTM to Feature File GXP00006834 Fix running of Import GUIs when spaces in path GXP00006882 Fixes crash for selecting stereo pairs for USMSD creation Fixes from Patch v541.20080204 +----------------------------------------------------------------+ GXP00006563 Allows staging of CADRG files from multiple CD drives Fixes from Patch v541.20080130 +----------------------------------------------------------------+ GXP00006878 FPE CIB Mosaics Broken on Unix Fixes from Patch v541.20080129 +----------------------------------------------------------------+ GXP00000726 SFA PLTS favorites are now populated while using SS sketch tools Fixes from Patch v541.20080128 +----------------------------------------------------------------+ GXP00006570 Fix Stage CADRG failure for certain CADRG CD s GXP00006837 Remove Unnecessary Error Message Fixes from Patch v541.20080123 +----------------------------------------------------------------+ GXP00006170 Fixed the problem of runway length parameter No need to change any ois file GXP00006416 Fixes for Import Bulk Patches and Ad hoc Patch Request GXP00006597 Correctly handle spaces in folder names GXP00006605 Fixes an issue with the DTM Properties window GXP00006672 DPPDB RPC Validation Binary Error GXP00006673 Mixed Sensor USMSD is Incomplete e g no UMICDA Record GXP00006826 Import USMSD Incompatible With 5 4 1 Patch Fixes from Patch v541.20080115 +----------------------------------------------------------------+ GXP00006531 FE selecting a different class doesn t change the geometry for extraction GXP00006569 DPPDB Quality Assurance Window Unstable GXP00006578 Rename TFRD Images Error GXP00006652 Filter Models by Rectangle Broken for Adjacents Fixes from Patch v541.20080109 +----------------------------------------------------------------+ GXP00006163 Add outlier reject user option which filters image samples used to compute the ratio transforms rejecting those that differ by more than the percentage specified GXP00006318 Fixes a buffer width issue when merging breaklines into a TIN GXP00006508 Small fix to orthophoto GXP00006540 Back Up ATF Files When Performing New Bulk Patch Request GXP00006591 Auto draw not working for feature extraction GXP00006596 CIB Merge 5 Meter Cells Fails to Generate A TOC Fixes from Patch v541.20071219 +----------------------------------------------------------------+ GXP00005335 Fixed Qt related code to conform to Qt s restrictions GXP00006411 Fix for Multiple Volume DPPDB Import GXP00006430 Allow Different Classification Levels for Uncompressed and Compressed CIB GXP00006434 allow NCDRD import in the exportable build GXP00006476 Unable to read v53 SMF support files in v54 Fixes from Patch v541.20071207 +----------------------------------------------------------------+ GXP00006194 Feature Extraction s Move With Clip function was wiping out the destination FDB GXP00006227 Allows selection of files with extension r0 tfd in Rename Images GXP00006230 Fix Duplicate Entries in DPPDB General Information Comment File GXP00006233 Add Accuracy Summary Report to DPPDB Segment Generation GXP00006291 Fixes crash in Import Support Data which happens on immediate exit from app GXP00006292 Feature Extraction was not always drawing all features with Auto Draw on GXP00006312 CADRG Status Hangs at 99 Percent GXP00006323 Fixed batch auto attribution for HGT and ZV2 batch_fdb GXP00006347 SFA Allow ArcMap to reconnect to socet_arcmap exe after it has been terminated GXP00006399 Fix for crash in Multi sensor Triangulation running APM in batch mode GXP00006425 External Rectangles Need a Unique Color in Review Edit Footprints