SOCET SET Patch for v541 Domestic, Build 20080617 (v541.20080617) DISCLAIMER: +-----------------------------------------------+ BAE Systems is making this engineering patch available to you as a convenience, and is intended for use by properly licensed customers of BAE Systems only. The patch is not supported as part of the official SOCET SET baseline. The patch application may overwrite some existing files of the base installation and/or make structural changes to the repository. For best results, it is recommended that you make a note of the base installed files to overwrite, and backup the base installed directory prior to applying the patch. If the engineering patch is a library, .dll or .so file, then the patch will be used by all SOCET SET applications, and every application is potentially affected. Save a copy of the original file that the engineering patch is replacing, and be prepared to restore the original file if the engineering patch adversely impacts your operations. The patch contained herein is provided "As Is." BAE Systems makes no warranties of any kind whatsoever with respect to the patch. In no event shall BAE Systems be liable for any special, direct, indirect, or consequential damages resulting from loss of use, data or profits arising out of, or in connection with the use or performance of this patch. EXPORT CONTROLLED: This software is subject to the export control laws and associated regulations of the United States. It may not be transferred to a non-U.S. person without the proper prior authorization of the U.S. Government +-----------------------------------------------------------+ Below are the DR numbers and descriptions of the fixes included in this patch. Every patch is cumulative, and includes the fixes from every prior patch. It is recommended that you make a backup of your current installation directory before installing this patch. The patch install will overwrite files in the target directory without creating backups. If you need to backout this patch, you will have to re-install the software from the original installation CD. No changes to your system will be made outside of the installation directory. Fixes from Patch v541.20080617; +----------------------------------------------------------------+ GXP00009529 Allow proper ArcWorld file creation running mosaic_manager in batch GXP00009585 Restores the function rti_get_image_mode Fixes from Patch v541.20080612 +----------------------------------------------------------------+ GXP00006947 Add Radarsat2 Import and Sensor Model fix crash in MST Solve GXP00009039 IPM Duplicate points found in the ipf file Fixes from Patch v541.20080611 +----------------------------------------------------------------+ GXP00006106 Add environment variables that specify directory for the sdf GXP00009605 SFA Add new button to ArcMap extension toolbar to refresh the graphics GXP00009735 FPE CIB Create Image Segments Crash for Mono Stereo Mix GXP00009775 FPE FDB points not displayed when file is re opened Fixes from Patch v541.20080609 +----------------------------------------------------------------+ GXP00007817 Changes the support file names and image ID s to be the full name for Worldview Basic Import GXP00009605 SFA Add button to ArcMap extension toolbar to refresh the graphics Fixes from Patch v541.20080605 +----------------------------------------------------------------+ GXP00006897 Add Terrasar-X sensor model and import GXP00006947 Add Radarsat2 sensor model and import GXP00007002 Added capability for UrbanModeler to populate OpenFlight Output GUI GXP00008709 Fix to retain DTED information in APM window when a new atf file is selected GXP00009184 TerraSAR-X import problem with view info GXP00009185 TerraSAR-X import problem with multiband images GXP00009256 Corrected problem with sat_import where the output support and image file names were incorrect GXP00009477 FPE Delete Previously Existing Sun Raster Files Before CIB Sheet Cutter GXP00009517 Quality Statistics DTM Check Point File vs DTM File generates a report file with additional XYZ coordinates GXP00009548 Fix to make file length designator for DPPDB image segments match actual padded size Fixes from Patch v541.20080527 +----------------------------------------------------------------+ GXP00009317 Fixes an issue in Merge when using features with the POLYHEDRON class Fixes from Patch v541.20080522 +----------------------------------------------------------------+ GXP00007708 Add support functions for urban modeler GXP00008790 DR8790 Track changes in Formosat2 data format Fixes from Patch v541.20080521 +----------------------------------------------------------------+ GXP00006566 Fixes the problem of USB Stealth3Mouse freeze for Model S2_Z GXP00006674 Change to allow selection of multiple stereo pairs when creating USMSD files in triangulation Fixes from Patch v541.20080516 +----------------------------------------------------------------+ GXP00008787 DR8787 Swiss Projection Reverse XY Coordinates GXP00008788 DR8788 Reverse Sign of EROSB Light Aberration Correction Fixes from Patch v541.20080513 +----------------------------------------------------------------+ GXP00008019 Add script check_y_parallax pl for DPPDB projects Fixes from Patch v541.20080512 +----------------------------------------------------------------+ GXP00008019 Add script check_y_parallax pl for DPPDB projects Fixes from Patch v541.20080508 +----------------------------------------------------------------+ GXP00006997 This patch fixes the Redraw tool for seamline editing There may still be some residual graphics after accepting a Redraw edit If this happens refresh the graphics to remove the residual graphics GXP00009122 SOCET For ArcGIS Changing the selection color in ArcMap is now supported with ESRI tools Fixes from Patch v541.20080507 +----------------------------------------------------------------+ GXP00008709 Fix to retain DTED information in APM window when a new atf file is selected Fixes from Patch v541.20080505 +----------------------------------------------------------------+ GXP00006548 Change Format of Relative Accuracy in DPPDB Hardcopy Manifest GXP00006952 Fix bug for creating A TOC file in Merge CIB Cells so that GDAT will recognize them GXP00008706 Fix to reset parameters on the Solve Window in triangulation when a new atf file is loaded GXP00008919 Fixes an incorrect output of the Average Y Difference when doing Check Pts vs Measured Pts GXP00008962 Fix SYSTEM_BANNER for patches from ssver executable Fixes from Patch v541.20080428 +----------------------------------------------------------------+ GXP00008709 Fix to retain DTED information in APM window when a new atf file is selected GXP00008772 Fix for populating Photo Date field for import of IKONOS images GXP00008827 FPE Sort Images on Import Assessment Imagery Window Table GXP00008828 Fix import nitf otho that spans two utm zones Fixes from Patch v541.20080425 +----------------------------------------------------------------+ GXP00007007 Allow a choice of rigorous or RPC sensor model during NCDRD import GXP00007114 FPE Don t Re Use Min Levels for DPPDB Overview Image GXP00007599 Changed Worldview1 and NCDRD sensor models to closely mimic DG MATLAB implementation Also added the keyword NUM_LINES_NOPAD to the NCDRD support file GXP00007950 Fix execution of UpdateGeoTIFFHeader on Solaris GXP00008539 FPE Delete Bulk Patch Order Ground Points Without Associated Patch GXP00008634 FPE MST USE Flag is Toggled Off for Adjacent Rectangles GXP00008653 Adds line numbers to ground points table in Image Point Measurement GXP00008775 FPE Leave Image Date Blank on CIB Overview if Image Date Unknown Fixes from Patch v541.20080422 +----------------------------------------------------------------+ GXP00006850 Merge Boundary Shift Annoyance GXP00006955 Change to Image Import Reformat to allow NCDRD imagery to be imported as RPC GXP00007079 Read IGEOLOB MAPLOB from NITFs when importing orthophotos GXP00008548 SFA selecting moving vertices is slow after the initial selection move GXP00008592 FPE Change Import Support Data Input Location to dps_input_files GXP00008636 FPE Support Data Inadvertently Deleted from dps_input_files GXP00008641 FPE Don t Write More Than 4 30 GB to DPPDB DVD Fixes from Patch v541.20080411 +----------------------------------------------------------------+ GXP00008235 ITE Query Post tool does not work in v541 GXP00008432 FPE Provide a Patch Status Window Fixes from Patch v541.20080404 +----------------------------------------------------------------+ GXP00008074 ITE undo corrupting TIN with Bare_earth_ _lay_on_ground tools GXP00008235 ITE Query Post tool does not work in v541 GXP00008443 Fixes a possible DTM graphics gap that only appears when a DTM is first drawn Fixes from Patch v541.20080402 +----------------------------------------------------------------+ GXP00008155 FPE Provide an Edit TRA Window GXP00008244 TIN breakline duplicates its vertices as masspoint Merge does not merge point features Fixes from Patch v541.20080326 +----------------------------------------------------------------+ GXP00006550 force patch install to deliver a new ssver executable Fixes from Patch v541.20080325 +----------------------------------------------------------------+ GXP00000000 updates for new patch build environment only Fixes from Patch v541.20080320 +----------------------------------------------------------------+ GXP00006953 FPE Don t Allow Certain Tie Points Between Adjacent Images Fixes from Patch v541.20080319 +----------------------------------------------------------------+ GXP00006414 Handle updates to GeoTIFF files larger than 2 G Byte GXP00007010 This patch allows the user to import Radarsat 2 data as RPC GXP00007260 Fixes crash in Import Bulk Patches when sorting columns in patch table Fixes from Patch v541.20080312 +----------------------------------------------------------------+ GXP00000000 updates for new patch build environment only GXP00005335 Fixed Qt related code to conform to Qt s restrictions GXP00006573 Changes DTED Import to use the same path each time for file selection GXP00006828 Change CIB ISVB Check to Only Degrade Classified Sensors GXP00006831 Fixes a possible overflow issue when creating a new DTM GXP00007080 Fixes Map Assessment when using one map image and control points GXP00007084 Provide Capability for North South DPPDB Segment Cuts GXP00007258 Review Edit Models Selection Jumps to End of List GXP00007297 Move Adjacent Rectangle Selection to Main Import Support Data Window Fixes from Patch v541.20080303 +----------------------------------------------------------------+ GXP00000000 updates for new patch build environment only Fixes from Patch v541.20080229 +----------------------------------------------------------------+ GXP00000000 updates for new patch build environment only GXP00005305 Make AIO working better for fine scan resolution e g 10 microns pixel GXP00006535 Read Write VerticaCSGeoKey into terrain geotiff header Fixes from Patch v541.20080219 +----------------------------------------------------------------+ GXP00000000 updates for new patch build environment only GXP00006422 This fix allows Partial Frame Fill to be run on a CIB job GXP00006535 Read Write VerticaCSGeoKey into terrain geotiff header GXP00006923 SFA Next and Previous Feature does not always work Fixes from Patch v541.20080213 +----------------------------------------------------------------+ GXP00006286 Fix the return value of cib_cmp_frm_exec Fixes from Patch v541.20080208 +----------------------------------------------------------------+ GXP00006580 Fix for Import Bulk Patches overwriting assessment_order_status file GXP00006645 Allows use of the u key in ITE s Write DTM to Feature File GXP00006834 Fix running of Import GUIs when spaces in path Fixes from Patch v541.20080204 +----------------------------------------------------------------+ GXP00006563 Allows staging of CADRG files from multiple CD drives Fixes from Patch v541.20080129 +----------------------------------------------------------------+ GXP00000726 SFA PLTS favorites are now populated while using SS sketch tools Fixes from Patch v541.20080128 +----------------------------------------------------------------+ GXP00006570 Fix Stage CADRG failure for certain CADRG CD s GXP00006837 Remove Unnecessary Error Message Fixes from Patch v541.20080123 +----------------------------------------------------------------+ GXP00006170 Fixed the problem of runway length parameter No need to change any ois file GXP00006416 Fixes for Import Bulk Patches and Ad hoc Patch Request GXP00006597 Correctly handle spaces in folder names GXP00006605 Fixes an issue with the DTM Properties window GXP00006672 DPPDB RPC Validation Binary Error GXP00006673 Mixed Sensor USMSD is Incomplete e g no UMICDA Record GXP00006826 Import USMSD Incompatible With 5 4 1 Patch Fixes from Patch v541.20080115 +----------------------------------------------------------------+ GXP00006531 FE selecting a different class doesn t change the geometry for extraction GXP00006569 DPPDB Quality Assurance Window Unstable GXP00006578 Rename TFRD Images Error GXP00006652 Filter Models by Rectangle Broken for Adjacents Fixes from Patch v541.20080109 +----------------------------------------------------------------+ GXP00006163 Add outlier reject user option which filters image samples used to compute the ratio transforms rejecting those that differ by more than the percentage specified GXP00006318 Fixes a buffer width issue when merging breaklines into a TIN GXP00006508 Small fix to orthophoto GXP00006591 Auto draw not working for feature extraction Fixes from Patch v541.20071219 +----------------------------------------------------------------+ GXP00005335 Fixed Qt related code to conform to Qt s restrictions GXP00006411 Fix for Multiple Volume DPPDB Import GXP00006430 Allow Different Classification Levels for Uncompressed and Compressed CIB GXP00006434 allow NCDRD import in the exportable build GXP00006476 Unable to read v53 SMF support files in v54 Fixes from Patch v541.20071207 +----------------------------------------------------------------+ GXP00006194 Feature Extraction s Move With Clip function was wiping out the destination FDB GXP00006227 Allows selection of files with extension r0 tfd in Rename Images GXP00006230 Fix Duplicate Entries in DPPDB General Information Comment File GXP00006233 Add Accuracy Summary Report to DPPDB Segment Generation GXP00006291 Fixes crash in Import Support Data which happens on immediate exit from app GXP00006292 Feature Extraction was not always drawing all features with Auto Draw on GXP00006312 CADRG Status Hangs at 99 Percent GXP00006323 Fixed batch auto attribution for HGT and ZV2 batch_fdb GXP00006399 Fix for crash in Multi sensor Triangulation running APM in batch mode